UCI Network Glossary

Summary: This is a glossary of network terms created in August 1998.

10Base2: Shared Ethernet distributed in a "daisy-chain" fashion from one workstation to the next using BNC tee-connectors and coaxial cable. Also known as "thinnet". The second-oldest form of commercial Ethernet.
10Base5: Shared Ethernet distributed over a special coax then tapped via transceivers which attach to the cable. The oldest form of commercial Ethernet.
10BaseT: A variant of Ethernet connecting stations via unshielded twisted pair cable using RJ-45 connectors, running at 10 Mbps. Deployed in a "star" topology, so-called because connections originate from a common point, the networking device, which may either be a hub or repeater (shared Ethernet) or a switch (switched Ethernet).
100BaseT: A variant of Ethernet connecting stations via Category 5 unshielded twisted pair cable, also with RJ-45 connectors, but running at 100 Mbps. 10 Mbps. Deployed in a "star" topology, so-called because connections originate from a common point, the networking device, which may either be a hub or repeater (shared Ethernet) or a switch (switched Ethernet).
Asynchronous Transfer Mode (ATM): A high speed, connection-oriented switching and multiplexing technology for transmitting information across a wide area or local area network in units called cells. ATM divides information up into fixed-length cells capable of transmitting several different types of traffic simultaneously. It is asynchronous in that information streams can be sent independently, without a common clock. ATM can be described in three planes: The user plane coordinates the interface between protocols and ATM; The management place coordinates the layers of the ATM stack; and the control plan coordinates signaling, setting up and tearing down virtual circuits.
ATM: See Asynchronous Transfer Mode.
bps: Bits per second. To convert to bytes per second, divide by 8.
Bytes per second: Bytes per second. To convert to bits per second, multiply by eight.
Backbone: The generic term for LAN or WAN connectivity between subnetworks across the enterprise. Generally a conduit for traffic between multiple networks which must operate at an order of magnitude greater speed and capacity than the networks it connects. Backbones are generally bordered by either switches which consult routers or by routers.
Bandwidth: This is the range of signal frequencies that can be carried on a communications channel. While this indicates the channels information carrying capacity, it is more commonly expressed in bits per second (bps), or mega (million) bits per second (Mbps). When one says bandwidth increases, one means that network capacity and perhaps speed has gone up.
Cable Plant: The physical infrastructure (wire, connectors, cables, etc) used to carry data communications signals between data communications equipment.
CAT5: See Category 5.
Category 5: A standards-based cable consisting of twisted-pair wire, with a specific number of twists per foot to reduce electrical crosstalk and provide a specific characteristic impedance (capacitive and inductive reactance) per each foot of cable. Used as an industry standard for modern cable plant, and required for Fast Ethernet. Desirable for 10BaseT as well.
Desktop: Generally considered to mean the confluence of a work location, a desk area and a computing device, distinct from a lab, which may have many computing devices. Intended to refer to one computing device, PC or workstation, which uses one network connection.
DNS: Domain Name System, or by extension, Domain Name Services.
Ethernet: Also known as CSMA/CD, it is a networking technology which relies upon collision detection to back off from simultaneous transmission. Operating at 10 Mbps, 100 Mbps (Fast Ethernet) and 1000 Mbps (Gigabit Ethernet), it is the single most commonly deployed networking technology in the LAN, and the primary one used in UCInet LANs. Ethernet is a layer-2 technology.
Ethernet Switch: A networking device which provides switched Ethernet. (see Switched Ethernet).
FDDI: A network based on a backbone of dual counter-rotating 100 Mbps fiber optic rings. One of the rings is normally designated as the primary, the other as the secondary. This even holds true if one of the point-to-point fiber optic segments becomes disabled. The counter-rotating rings are connected to single-fiber slave rings through concentrators. Bypassing inactive stations is accomplished with fiber optic switches. FDDI allows higher utilization than Ethernet. One of several technologies used in the UCInet backbone.
FTP: See File Transfer Protocol.
File Transfer Protocol: The Internet (TCP/IP) protocol and program are used to transfer files between hosts.
Gbps (Giga bps): A billion bits per second.
Hub: The center of a star topology network or cabling system. The term Ethernet hub typically refers to a shared-media hub. Sometimes referred to as a repeater. Supports shared Ethernet in a "star" topology over Category 5 twisted-pair wire terminated by RJ-45 data jacks.
IP: See Internet Protocol.
ISP: Internet Service Provider.
Internet: The Internet; successor to DARPA-NET. Worldwide internetwork based on the TCP/IP protocol.
Internet Protocol (IP): Part of the TCP/IP protocol suite. The layer three protocol used in a set of protocols which support the Internet and many private networks. IP provides a connectionless datagram delivery service for transport-layer protocols such as TCP and UDP.
Kbps - (Kilo bps): A thousand bits per second.
LAN: See Local Area Network.
Local Area Network - (LAN): A network, typically Token Ring or ATM, which connects together multiple computers, printers and other network devices in a departmental or workgroup setting. It may be connected to other LANs via a backbone, typically through a router or routing device, or connected to a through a router to a WAN connection to other networks, such as the Internet.
Mbps - (Mega bps): A million bits per second.
MAC Address: The hardware address of a device connected to a network. In Ethernet, the Ethernet address.
Micro segmentation: The technique of splitting up shared network segments by deploying switching to reduce the size of the collision domain, reduce congestion and improve throughput.
MTA: Mail Transport Agent. Unlike an MTC, the MTA actually handles sending and receiving the email to and from the system it is based upon. Most MTAs support aliasing and forwarding, as well as either the POP or IMAP protocols for clients which do not have standard MTA support upon their computer. MTAs which support POP and/or IMAP are referred to as mailhosts, and often support other functions. At UCI, MTAs are used to accept mail from the network and the outside world, then forward the mail to specific places. Mail address to user-id@uci.edu goes through campus MTAs for translation to delivery points, and actual delivery.
MTC: Mail Transport Client. Provides a user-interface for the management of email received, or the creation of it.
Multicast: A form of broadcast where copies of a packet are delivered only to a subset of all possible destinations.
Multicasting: Directing a message or a packet to some subset of all stations on a network by the use of a special destination address.
Network Segment: A portion of a network set apart from other network sections by a bridge, router or switch. Each network segment supports a single medium access protocol and a pre-determined bandwidth. The more stations are on a network segment the more divided this bandwidth is. Crowded network segments lead to a condition known as congestion, where performance declines. An electrically continuous piece of a bus based LAN. Segments can be joined together using repeaters, bridges or routers. Segments may also be split apart using the same devices. The use of switches to break up segments is known as micro segmentation. See also shared and switched Ethernet.
PH: A program used on several campuses, including UCI, as an interface to the QI database. Used as an electronic phone book.
PH/QI: Used, generally interchangeably with PH, as a reference to PH, the UCI campus electronic phone book.
QI: The database UCI uses with ph, as part of the ph/qi phone book.
QoS: See Quality of Service.
Quality of Service: This is a networking term which may be used in one of two ways. In the first way, it represents a quality of networking. In the second, referred to usually as "QoS", it represents a guarantee or commitment to not only a particular quality of network service but also a particular rate or minimum rate of data delivery, as well as maximum times between packets of data. Used where applications are sensitive to delays, such as video conferencing. Initially a feature of ATM, it is now being incorporated into the TCP/IP protocol and will eventually be available as a service on non-ATM networks. A statement that QoS is is provided is distinct from one which says QoS guarantees are provided. UCInet provides a good quality of service, but not QoS guarantees as part of Basic Network Services.
ROUTING: The function of determining the route a packet should take from a subnet to get to another subnet. A component function of all internetworks, or internets. The process of delivering a message across a network or networks by the most appropriate path.
Route: The patch that network traffic takes from its source to its destination.
Router: A system responsible for making decisions about which of several paths network traffic will take, and for keeping track of routing information which is being passed along a network be one of several different possible protocols. To do this a router uses a routing protocol to gain information about the network and uses algorithms to choose the best router based on several criteria known as route metrics. In OSI terminology, a router is a Network Layer intermediate system. See also IP router.
Shared Ethernet: A network segment which has multiple nodes connected, and where available bandwidth is divided among users in a dividing effect. May be deployed using 10Base5, 10Base2 or 10BaseT (the latter being a hub). The most widely deployed technology in UCInet.
Simple Network Management Protocol: Both a way of obtaining and storing information about network devices. A protocol designed to manage networking devices. SNMP capable devices keep statistics on their operation, if instructed to do so, which may be remotely fetched and analyzed by central management stations.
SNMP: See Simple Network Management Protocol.
Star: A network topology where each node is connected to a central hub.
Subnet: A portion of a network, which may be physically independent, that shares a network address with other portions of the network and is distinguished by a subnet number. Subnets are created and supported by the use of routing.
Subnet Address: The subnet portion of an IP address.
Switch: A device which logically connects to network stations through a network fabric. See also Switched Ethernet.
Switched Ethernet: An Ethernet technology deployed from a central box over Category 5 twisted-pair wire or fiber optic, and which allows the full utilization of bandwidth for each network conversation by switching connections point-to-point between stations talking to each other, providing in effect a dedicated connection. Considered to be an order of magnitude faster than its shared counterpart.
Thicknet: See 10Base5.
Thinnet: See 10Base2.
TCP: See Transmission Control Protocol.
TCP/IP: Transport Control Protocol / Internet Protocol. The protocol of the Internet and most internets and many intranets.
Transmission Control Protocol: A layer-four protocol in the set of protocols which support the Internet and many private networks. TCP is the TCP portion of TCP/IP, and provides a guaranteed transport service.
UCInetId: (Also UCInet-id or Ucinet-Id) Unique string of characters representing an entry in the campus electronic phone book and in the campus authentication database. When coupled with the string '@uci.edu', it becomes a campus email address. UCInet has services (ph/qi, Kerberos authentication, MTAs, etc.) which consult these databases in order to authenticate users, forward or deliver email, and assist users in finding other users on the network, by phone or location.
VLAN: See Virtual Local Area Network.
Virtual Local Area Network: Individual workstations, rather than being directly connected to a shared media, are instead connected to an intelligent device such as a switch which has the capability through software to define LAN membership. This permits a systems administrator to resegment the LAN without changing the physical arrangement. It also allows, with some switching technologies, the ability to support multiple subnets on a single switch where a series of router interfaces were previously required.
WAN: See Wide Area Network.
Wide Area Network: A network which covers a larger geographical area than a LAN or a MAN and where telecommunications links are implemented, normally leased from the appropriate Private Telephone Operator(s). Examples of WANs include packet switched networks, public data networks and Value Added Networks (VANs).
WAN Connection: A network connection, usually through a router or an ATM switch, which connects two geographically distanced networks together.

Return to Top

Didn't find what you were looking for? Try Cisco Systems Network Glossary for more terms.